Units
Press the vehicle information button until UNITS displays. This display allows you to select between metric or English units of measurement.
Once in this display, press the set/ reset button to select between METRIC or ENGLISH units. All of the vehicle information will then be displayed in the unit of measurement selected.
See also:
Manual Operation of Power Liftgate
To change the liftgate to manual operation, turn the mode switch to the OFF position.
With the power liftgate disabled and all of the doors unlocked, the liftgate
can be manually opened and closed. ...
Driving in Mud, Sand, Snow, or Ice
Use a low gear when driving in mud – the deeper the mud, the lower the gear. Keep the vehicle moving to avoid getting stuck.
Traction changes when driving on sand. On loose sand, such as on beaches ...
Removing Tools
The tools needed to remove the spare tire are located in the storage compartment on the driver side, at the rear of the vehicle.
1. Open the jack storage compartment by pulling on the latch tab, loca ...