AM-FM Radio and AM-FM Radio with CD Player
To set the clock:
1. Turn the ignition key to ACC/ ACCESSORY or ON/RUN, then press the button to turn the radio on.
2. Press the button until the hour numbers begin to flash, then turn the
knob to increase or decrease the hour.
3. Press the button until the minute numbers begin to flash, then turn the
knob to increase or decrease the minutes.
4. Press the button until the 12HR or 24HR time format begins to flash, then turn the
knob to change the time format.
5. Press the button again until the clock display stops flashing to set the currently displayed time, or wait until the flashing stops after five seconds and the current time displayed automatically sets.
See also:
Electrical System Overload
The vehicle has fuses and circuit breakers to protect against an electrical system overload.
When the current electrical load is too heavy, the circuit breaker opens and closes, protecting the circui ...
EQ Settings
The EQ settings are selected through the tone menu. Press the left or right arrows
to cycle through the EQ options. The available choices are Pop, Rock, Jazz, Classical,
and Talk. ...
Shifting Out of Neutral
To shift the transfer case out of N (Neutral) do the following:
1. Set the parking brake and apply the regular brake pedal.
2. Turn the ignition to ON/RUN with the engine off, and shift the transmis ...