Rear Seats (All Split Bench and Hybrid Full Bench)
Folding Rear Seat
Either side of the rear seat can be folded for added cargo space.
Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety belts and return them to their normal stowed position before folding a rear seat.
Make sure that nothing is on the seat.
To fold the seat, slowly pull the seat cushion up.
To return the seat to the normal seating position, slowly pull the seat cushion down.
Make sure the safety belts are not twisted or caught in the seat cushion.
WARNING
A safety belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash. The person wearing the belt could be seriously injured. After raising the rear seatback, always check to be sure that the safety belts are properly routed and attached, and are not twisted.
See also:
Traction – AA, A, B, C
The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test ...
Remote Control
To use the remote control, aim it at the transmitter window at either seatback
console and press the button. Direct sunlight or very bright light could affect
the ability of the RSE transmitter ...
Steering Wheel Adjustment
The tilt lever is located on the lower left side of the steering column.
To adjust the steering wheel:
1. Hold the steering wheel and pull the lever.
2. Move the steering wheel up or down.
3. Re ...