Easy Exit Driver Seat
This feature can move the seat rearward to allow extra room to exit the vehicle.
(Easy Exit Driver Seat):
Press to recall the easy exit seat position.
The vehicle must be in P (Park).
If the easy exit seat feature is programmed on in the vehicle personalization menu, automatic seat movement occurs when the ignition key is removed.
A single beep sounds. The driver seat moves back approximately 8 cm (3 in). To move the seat back farther, press again until the seat is all the way back.
If something has blocked the driver seat while recalling the exit position, the recall may stop. Remove the obstruction; then press and hold the power seat control rearward for two seconds. Try recalling the exit position again. If the exit position is still not recalling, see your dealer for service.
See Vehicle Personalization (With DIC Buttons) on page 5‑52 for more information.
See also:
When the System Does Not Seem To Work Properly
The rear vision camera system might not work properly or display a clear image if:
• The RVC is turned off.
See “Turning the Rear Camera System On or Off” earlier in this section.
• It is d ...
Video Screen Input Jack
Each video screen is equipped with a video input jack to allow video cables to
be connected from an auxiliary device such as a camcorder or a video game system.
This signal will override any video ...
Speedometer
The speedometer shows how fast the vehicle is moving in either kilometers per hour (km/h) or miles per hour (mph). The speedometer cannot be reset. ...