Removal and Installation of the Sealant Canister
To remove the sealant canister:
1. Unwrap the sealant hose.
2. Press the canister release button.
3. Pull up and remove the canister.
4. Replace with a new canister which is available from your dealer.
5. Push the new canister into place.
See also:
Certification Label
Label Example
A vehicle-specific Certification label is attached to the lower center pillar
on the driver side of the vehicle or on the rear edge of the driver door. The label
shows the size of ...
Rear Seats
The rear seat has adjustable headrests in the outboard seating positions.
The height of the headrest can be adjusted. Pull the headrest up to raise it. To lower the headrest, push down on the headres ...
Low Fuel Warning Light
This light, under the fuel gauge, comes on briefly while the engine is being started.
This light and a chime, if the vehicle is equipped with a radio, comes on when the fuel tank is low on fuel.
T ...