LED Lighting

This vehicle has several LED lamps.

For replacement of any LED lighting assembly, contact your dealer.

    See also:

    License Plate Lamp
    To replace one of these bulbs: 1. Reach under the rear bumper for the bulb socket. 2. Turn the bulb socket counterclockwise and pull the bulb socket out of the lamp assembly. 3. Pull the old bulb ...

    Conditions in Which the Remote Start Will Not Work
    The vehicle cannot be started using the remote start feature if the key is in the ignition, the hood is open, or if there is an emission control system malfunction. The engine turns off during a remo ...

    Back–Up Lamp
    Removal of the lamp assembly is not required to replace the back-up lamp bulb. To replace one of these lamps: 1. Open the liftgate. See Liftgate on page 2‑9. 2. Remove the interior trim acces ...