Turning the Rear Vision Camera System On or Off
To turn the rear vision camera system on or off:
1. Shift into P (Park).
2. Press the MENU button to enter the configure menu options, then press the MENU hard key to select Display or touch the Display screen button.
3. Select the Rear Camera Options screen button. The Rear Camera Options screen displays.
4. Select the Video screen button.
When the Video screen button is highlighted the RVC system is on.
The delay received after shifting out of R (Reverse) is approximately 10 seconds. The delay can be canceled by performing one of the following:
• Pressing a hard key on the navigation system.
• Shifting into P (Park).
• Reach a vehicle speed of 5 mph (8 km/h).
There is a message on the rear vision camera screen that states “Check Surroundings for Safety.”
See also:
Universal Remote System Operation
Press and hold the appropriate button for at least half of a second.
The indicator light will come on while the signal is being transmitted. ...
Safety Locks
The vehicle has rear door security locks to prevent passengers from opening the rear doors from the inside.
Open the rear doors to access the security locks on the inside edge of each door.
To set ...
Traction – AA, A, B, C
The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test ...