Skidding

There are three types of skids that correspond to the vehicle's three control systems:
• Braking Skid — wheels are not rolling.
• Steering or Cornering Skid — too much speed or steering in a curve causes tires to slip and lose cornering force.
• Acceleration Skid — too much throttle causes the driving wheels to spin.

Defensive drivers avoid most skids by taking reasonable care suited to existing conditions, and by not overdriving those conditions.

But skids are always possible.

If the vehicle starts to slide, follow these suggestions:

• Ease your foot off the accelerator pedal and quickly steer the way you want the vehicle to go. The vehicle may straighten out. Be ready for a second skid if it occurs.

• Slow down and adjust your driving according to weather conditions. Stopping distance can be longer and vehicle control can be affected when traction is reduced by water, snow, ice, gravel, or other material on the road.

Learn to recognize warning clues — such as enough water, ice, or packed snow on the road to make a mirrored surface — and slow down when you have any doubt.

• Try to avoid sudden steering, acceleration, or braking, including reducing vehicle speed by shifting to a lower gear. Any sudden changes could cause the tires to slide.

Remember: Antilock brakes help avoid only the braking skid.

    See also:

    Adding Equipment to the Airbag-Equipped Vehicle
    Q: Is there anything I might add to or change about the vehicle that could keep the airbags from working properly? A: Yes. If you add things that change the vehicle's frame, bumper system, heig ...

    Checking Brake Fluid
    Check brake fluid by looking at the brake fluid reservoir. See Engine Compartment Overview on page 10‑6. The fluid level should be above MIN. If it is not, have the brake hydraulic system che ...

    Storing and Deleting Phone Numbers
    The system can store up to 30 phone numbers as name tags in the Hands&-Free Directory that is shared between the Bluetooth and OnStar systems. The following commands are used to delete and stor ...