Cleaning the Video Screen
Use only a clean cloth dampened with clean water. Use care when directly touching or cleaning the screen, as damage could result.
See also:
Compass Calibration Procedure
1. Before calibrating the compass, make sure the compass zone is set to the variance zone in which the vehicle is located. See “Compass Variance (Zone) Procedure” earlier in this section.
Do not ...
Protecting Exterior Bright Metal Parts
Regularly clean bright metal parts with water or chrome polish on chrome or stainless steel trim, if necessary.
For aluminum, never use auto or chrome polish, steam, or caustic soap to clean. A coati ...
Starting Procedure
1. With your foot off the accelerator pedal, turn the ignition key to START. When the engine starts, let go of the key. The idle speed will go down as your engine gets warm. Do not race the engine imm ...





