Air Vents

Use the air outlets located in the center and on the side of the instrument panel to direct the airflow. Use the thumbwheels near the air outlets to open or close off the airflow.

Operation Tips

• Clear away any ice, snow, or leaves from air inlets at the base of the windshield that could block the flow of air into the vehicle.

• Keep the path under the front seats clear of objects to help circulate the air inside of the vehicle more effectively.

• Use of non-GM approved hood deflectors can adversely affect the performance of the system.

Check with your dealer before adding equipment to the outside of the vehicle.

    See also:

    Electric Brake Control Wiring Provisions
    These wiring provisions are included with the vehicle as part of the trailer wiring package. These provisions are for an electric brake controller. The instrument panel contains blunt cut wires behind ...

    Passing
    More passing distance is needed when towing a trailer. Because the rig is longer, it is necessary to go farther beyond the passed vehicle before returning to the lane. ...

    Engine Cooling When Trailer Towing
    The cooling system may temporarily overheat during severe operating conditions. See Engine Overheating on page 10‑18. ...