Setting the Tone (Bass/Midrange/Treble)

BASS/MID/TREB (Bass, Midrange, or Treble):
To adjust bass, midrange, or treble:
1. Press 2. Continue pressing  to highlight the tab, or press the softkey under the tab. until the tone control tabs display.
2. Continue pressing 3. To adjust the highlighted setting, do one of the following until the levels are obtained: to highlight the tab, or press the softkey under the tab.
3. To adjust the highlighted setting, do one of the following until the levels are obtained:
• Turn • Press  FWD, or clockwise or counterclockwise.
• Press REV. FWD, or REV. REV.

If a station's frequency is weak or if there is static, decrease the treble.

To quickly adjust bass, midrange, or treble to the middle position, press the softkey under the BASS, MID, or TREB tab for more than two seconds. A beep sounds and the level adjusts to the middle position.

To quickly adjust all tone and speaker controls to the middle position, press EQ (Equalization): Press to choose bass and treble equalization settings designed for different types of music. The choices are pop, rock, country, talk, jazz, and classical. for more than two seconds until a beep sounds.

EQ (Equalization): Press to choose bass and treble equalization settings designed for different types of music. The choices are pop, rock, country, talk, jazz, and classical.

Selecting MANUAL or changing bass or treble, returns the EQ to the manual bass and treble settings.

Unique EQ settings can be saved for each source.

If the radio has a Bose® audio system, the EQ settings are either MANUAL or TALK.

    See also:

    Rear Window Lockout
    The rear window lockout feature prevents the rear passenger windows from operating, except from the driver position. Press to activate the rear window lockout switch. The LED light comes on when a ...

    Bluetooth Controls
    Use the buttons located on the infotainment system and the steering wheel to operate the Bluetooth system. Steering Wheel Controls (Push To Talk): Press to answer incoming calls, confirm system ...

    Starting Procedure
    1. With your foot off the accelerator pedal, turn the ignition key to START. When the engine starts, let go of the key. The idle speed will go down as your engine gets warm. Do not race the engine imm ...