Using ABS
Do not pump the brakes. Just hold the brake pedal down firmly and let ABS work. You might hear the ABS pump or motor operating and feel the brake pedal pulsate, but this is normal.
See also:
Trailer Gain Adjustment Procedure
Trailer Gain should be set for a specific trailering condition and must be adjusted any time vehicle loading, trailer loading, or road surface conditions change.
Setting the Trailer Gain properly is ...
Remote Start Heated Seats
When it is cold outside, the heated seats can be programmed to turn on automatically
during a remote vehicle start. The heated seats will be canceled when the ignition
is turned on. Press the heat ...
Voltmeter Gauge
This gauge indicates the battery voltage when the ignition is turned on.
When the ignition is on, this gauge indicates the battery voltage.
When the engine is running, this gauge shows the conditi ...