Making a Call

To make a call:
1. Press 5 once or twice (depending on the radio).
2. Enter the phone number.
3. Select Call to start dialing the number.

    See also:

    Flash-to-Pass
    This feature is used to signal to the vehicle ahead that you want to pass. If the headlamps are off or in the low-beam position, pull the turn signal lever toward you to momentarily switch to high be ...

    Windshield Wiper/Washer
    The front wiper control is located on the turn and lane-change lever. The windshield wipers are controlled by turning the band with on it. (Mist): For a single wipe, turn to , then release ...

    Unable to Connect to OnStar Message
    If there is limited cellular coverage or the cellular network has reached maximum capacity, this message may come on. Push to try the call again or try again after driving a few miles into another ce ...