Automatic Transmission Shift Lock Control Function Check

GMC Sierra / GMC Sierra Owners Manuals / Vehicle Care / Vehicle Checks / Automatic Transmission Shift Lock Control Function Check

WARNING
When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured.

1. Before starting this check, be sure there is enough room around the vehicle. It should be parked on a level surface.

2. Firmly apply the parking brake.

See Parking Brake on page 9‑58.

Be ready to apply the regular brake immediately if the vehicle begins to move.

3. With the engine off, turn the ignition on, but do not start the engine. Without applying the regular brake, try to move the shift lever out of P (Park) with normal effort. If the shift lever moves out of P (Park), contact your dealer for service.

    See also:

    Compass Calibration Procedure
    1. Before calibrating the compass, make sure the compass zone is set to the variance zone in which the vehicle is located. See “Compass Variance (Zone) Procedure” earlier in this section. Do not ...

    How to Check Lubricant
    To get an accurate reading, the vehicle should be on a level surface. 1500 Series A. Fill Plug B. Drain Plug All Except 1500 Series A. Fill Plug B. Drain Plug • When the differential is c ...

    Engine Oil Pressure Gauge
    Metric English The engine oil pressure gauge shows the engine oil pressure in kPa (kilopascals) or psi (pounds per square inch) when the engine is running. Oil pressure can vary with engine spe ...