See also:

Flash-to-Pass
The flash&-to&-pass feature works with the low beams or Daytime Running Lamps (DRL) on or off. To flash the high beams, pull the turn signal/lane change lever all the way toward you, then ...

Electronic Transfer Case
The transfer case knob is located next to the steering column. Use the dial to shift into and out of four-wheel drive. ...

License Plate Lamp
To replace one of these bulbs: 1. Reach under the rear bumper for the bulb socket. 2. Turn the bulb socket counterclockwise and pull the bulb socket out of the lamp assembly. 3. Pull the old bulb ...