StabiliTrak® System

If equipped, the vehicle has a traction control system that limits wheel spin and the StabiliTrak system that assists with directional control of the vehicle in difficult driving conditions. Both systems turn on automatically every time the vehicle is started.

• To turn off traction control, press and release • To turn off both traction control and StabiliTrak, press and hold until on the instrument panel. The appropriate DIC message displays. See Ride Control System Messages on page 5‑47.

• To turn off both traction control and StabiliTrak, press and hold illuminates and the appropriate DIC message displays. See Ride Control System Messages on page 5‑47. until • Press and release again to turn on both systems. illuminates and the appropriate DIC message displays. See Ride Control System Messages on page 5‑47.

• Press and release For more information, see StabiliTrak® System on page 9‑59. again to turn on both systems.

For more information, see StabiliTrak® System on page 9‑59.

    See also:

    Lamp Messages
    TURN SIGNAL ON This message displays and a chime sounds if a turn signal is left on for 1.2 km (0.75 mile). Move the turn signal/multifunction lever to the off position. ...

    General Towing Information
    Only use towing equipment that has been designed for the vehicle. Contact your dealer or trailering dealer for assistance with preparing the vehicle for towing a trailer. See the following trailer ...

    Ride Control System Messages
    SERVICE STABILITRAK If the vehicle has StabiliTrak and this message displays, it means there may be a problem with the StabiliTrak system. If you see this message, try to reset the system. Stop; tur ...