Removal and Installation of the Sealant Canister
To remove the sealant canister:
1. Unwrap the sealant hose.
2. Press the canister release button.
3. Pull up and remove the canister.
4. Replace with a new canister which is available from your dealer.
5. Push the new canister into place.
See also:
License Plate Lamp
To replace one of these bulbs:
1. Remove the two screws holding each of the license plate lamps to the liftgate trim.
2. Turn and pull the license plate lamp forward through the liftgate trim open ...
Adjusting the Speakers (Balance/Fade) (All Except AM-FM Radio and Radio with
CD)
BAL/FADE (Balance/Fade): To adjust the balance or fade:
1. Press the knob until the speaker control tabs display.
2. Highlight the desired speaker control tab by doing one of the following:
• Pr ...
Active Fuel Management®
Vehicles with V8 engines may have Active Fuel Management™. This system allows the engine to operate on either all or half of its cylinders, depending on the driving conditions.
When less power is r ...