Automatic Transmission Shift Lock Control Function Check
WARNING
When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured.
1. Before starting this check, be sure there is enough room around the vehicle. It should be parked on a level surface.
2. Firmly apply the parking brake.
See Parking Brake on page 9‑28.
Be ready to apply the regular brake immediately if the vehicle begins to move.
3. With the engine off, turn the ignition on, but do not start the engine. Without applying the regular brake, try to move the shift lever out of P (Park) with normal effort. If the shift lever moves out of P (Park), contact your dealer for service.
See also:
Cargo Tie-Downs
Four cargo tie-downs are located in the rear compartment of the vehicle.
The tie-downs can be used to secure small loads. ...
Using the 3.5mm (1/8 in) Auxiliary Input Jack
The auxiliary input jack is located on the lower right side of the faceplate.
This is not an audio output; do not plug a headphone set into the front auxiliary input jack. Connect an auxiliary input ...
Canceling a Remote Start
To cancel a remote start, do one of the following:
○ Press until the parking lamps
turn off.
○ Turn on the hazard warning flashers.
○ Insert the key and turn it to ON/ RUN and ...





