Increasing Speed While Using Cruise Control
If the cruise control system is already activated:
• Press and hold the +RES button on the steering wheel until the desired speed is reached, then release it.
• To increase vehicle speed in small increments, press the +RES button briefly. Each time this is done, the vehicle goes about 1.6 km/h (1 mph) faster.
See also:
Grade Braking (6-Speed Automatic Transmission)
The Grade Braking shift modes can be activated by pressing the button on the end of the shift control lever.
While in Range Selection Mode, Grade Braking is deactivated allowing the driver to select ...
Replacing LATCH System Parts After a Crash
WARNING
A crash can damage the LATCH system in the vehicle. A damaged LATCH system may
not properly secure the child restraint, resulting in serious injury or even death
in a crash. To help make ...
California Proposition 65 Warning
Most motor vehicles, including this one, contain and/or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Engine exhaust, many parts and sys ...