Safety System Check
Now and then, check that the safety belt reminder light, safety belts, buckles, latch plates, retractors, and anchorages are all working properly.
Look for any other loose or damaged safety belt system parts that might keep a safety belt system from doing its job. See your dealer to have it repaired. Torn or frayed safety belts may not protect you in a crash. They can rip apart under impact forces. If a belt is torn or frayed, get a new one right away.
Make sure the safety belt reminder light is working. See Safety Belt Reminders on page 5‑15 for more information.
Keep safety belts clean and dry.
See Safety Belt Care on page 3‑23.
See also:
Instrument Panel Fuse Block
The instrument panel fuse block is located under the instrument panel on the passenger side of the vehicle. Pull down on the cover to access the fuse block.
Fuse Side
The vehicle may not be equipp ...
Rear Towing (Rear Wheels Off the Ground)
Two-Wheel-Drive Vehicles
Use the following procedure to dolly tow a two-wheel-drive vehicle from the rear:
1. Attach the dolly to the tow vehicle following the dolly manufacturer's instructions.
...
Driver Information Center (DIC) (With DIC Buttons)
If your vehicle has DIC buttons, the information below explains the operation of this system.
The DIC displays information about your vehicle. It also displays warning messages if a system problem is ...