Under the Hood
195-horsepower, 4.3-liter V-6 with iron block and cylinder heads,
cam-in-block, two valves per cylinder and 260 pounds-feet of torque
302-hp, 4.8-liter V-8 with iron block and aluminum cylinder heads, cam-in-block,
two valves per cylinder and 305 pounds-feet of torque
Flex-fuel 315-hp (gas) or 326-hp (E85), 5.3-liter V-8 with iron block and
aluminum cylinder heads, cam-in-block, two valves per cylinder and 338
pounds-feet of torque (gas) or 350 pounds-feet of torque (E85)
Flex-fuel 315-hp (gas) or 326-hp (E85), 5.3-liter V-8 with aluminum block and
cylinder heads, cam-in-block, two valves per cylinder and 338 pounds-feet of
torque (gas) or 350 pounds-feet of torque (E85)
Flex-fuel 403-hp, 6.2-liter V-8 with aluminum block/cylinder heads, cam-in-block
and two valves per cylinder that makes 417 pounds-feet of torque
Four-speed automatic
Six-speed automatic
See also:
Power Lumbar
Power Lumbar
To adjust the power lumbar support, if equipped:
• On vehicles with two-way lumbar, press and hold the top or bottom of the control to increase or decrease lumbar support.
• On v ...
Towing the Vehicle
Notice: To avoid damage, the disabled vehicle should be towed with all four wheels off the ground. Care must be taken with vehicles that have low ground clearance and/or special equipment. Always flat ...
Tire Rotation and Required Services Every 12 000 km/7,500 mi
Rotate the tires, if recommended for the vehicle, and perform the following services. See Tire Rotation on page 10‑68.
• Check engine oil level and oil life percentage. If needed, change engi ...





