Manual Operation of Power Liftgate
To change the liftgate to manual operation, press OFF on the power liftgate switch. A message displays on the DIC indicating manual operation mode. See Driver Information Center (DIC) (Without DIC Buttons) on page 5‑30 or Driver Information Center (DIC) (With DIC Buttons) on page 5‑25.
With the liftgate in manual mode and all of the doors unlocked, the liftgate can be manually opened and closed.
To open the liftgate, press the touch pad on the outside of the liftgate handle and lift up. Use the pull handle to lower and close the liftgate, the liftgate latch will power close.
Always close the liftgate before driving.
If 
on the RKE transmitter or the 
on the liftgate is pressed while in manual operation mode, the taillamps will flash three times, but the liftgate will not move.
It is not recommended to drive with the liftgate open. However, if the vehicle must be driven with the liftgate open, the liftgate should be set to manual operation.
See also:
Other Rainy Weather Tips
Besides slowing down, other wet weather driving tips include:
• Allow extra following distance.
• Pass with caution.
• Keep windshield wiping equipment in good shape.
• Keep the windshield ...
Voltmeter Gauge
When the engine is not running, but the ignition is turned on, this gauge shows the battery's state of charge in DC volts.
When the engine is running, this gauge shows the condition of the charging ...
Full-Size Spare Tire
Your vehicle, when new, had a fully-inflated spare tire. A spare tire may lose air over time, so check its inflation pressure regularly. See Tire Pressure on page 10‑62 and Vehicle Load Limits o ...