Storing Memory Positions
To save into memory:
1. Adjust the driver seat, seatback recliner, and both outside mirrors.
See Power Mirrors on page 2‑16 for more information.
Not all vehicles will have the ability to save and recall the mirror positions.
2. Press and hold “1” until two beeps sound.
3. Repeat for a second driver position using “2.”
To recall, press and release “1” or “2.” The vehicle must be in P (Park). A single beep will sound.
The seat and outside mirrors will move to the position previously stored for the identified driver.
See Memory Seats on page 3‑7 and Vehicle Personalization (With DIC Buttons) on page 5‑46 for more information.
See also:
Malfunction Indicator Lamp
A computer system called OBD II (On-Board Diagnostics-Second Generation) monitors
the operation of the vehicle to ensure emissions are at acceptable levels, to produce
a cleaner environment. This ...
Center Console Storage
For vehicles with a center console storage, use the lever (A) on the front to
open. ...
Using Softkeys to Control a USB Storage Device or iPod
The five softkeys below the radio display are used to control the functions listed below.
To use the softkeys:
1. Press the first or fifth softkey below the radio display to display the functions li ...