How to Check Automatic Transmission Fluid
It is not necessary to check the transmission fluid level. A transmission fluid leak is the only reason for fluid loss. If a leak occurs, take the vehicle to your dealer and have it repaired as soon as possible.
There is a special procedure for checking and changing the transmission fluid. Because this procedure is difficult, this should be done at your dealer. Contact your dealer for additional information or the procedure can be found in the service manual. To purchase a service manual, see Service Publications Ordering Information on page 13‑17.
Change the fluid and filter at the intervals listed in Maintenance Schedule on page 11‑3, and be sure to use the fluid listed in Recommended Fluids and Lubricants on page 11‑12.
See also:
Add-on Electrical Equipment
The OnStar system is integrated into the electrical architecture of the vehicle.
Do not add any electrical equipment. See Add-On Electrical Equipment on page 9‑64.
Added electrical equipment ...
Cruise Control
WARNING
Cruise control can be dangerous where you cannot drive safely at a steady speed. So, do not use the cruise control on winding roads or in heavy traffic.
Cruise control can be dangerous on sl ...
To Use the Engine Coolant Heater
1. Turn off the engine.
2. Open the hood and unwrap the electrical cord. The cord is secured to the Engine Compartment Fuse Block with a clip. Carefully remove the wire tie which bundles the electric ...





