If You Cannot See the HUD Image When the Ignition Is On
• Is anything covering the HUD lens?
• Is the HUD dimmer setting bright enough?
• Is the HUD image adjusted to the proper height?
• Are you wearing polarized sunglasses?
• Still no HUD image? Check the fuse in the instrument panel fuse block. See Instrument Panel Fuse Block on page 10‑34.
See also:
Parking Brake
To set the parking brake, hold the regular brake pedal down, then push the parking
brake pedal down.
If the ignition is on, the brake system warning light will come on. See Brake
System Warning ...
Engine Power Messages
ENGINE POWER IS REDUCED
This message displays and a chime sounds when the cooling system temperature gets too hot and the engine further enters the engine coolant protection mode.
See Engine Overhea ...
Shifting In or Out of Neutral
1. With the vehicle running and the engine at an idle, set the parking brake.
2. Place the transmission into N (Neutral).
Shift the transfer case in one continuous motion into or out of the N (Neutr ...





