Using Voice Commands During a Planned Route

Cancel Route

1. Push “OnStar ready,” then a tone. Say “Cancel route.” System responds: “Would you like to cancel route directions to your destination?” 2. Say “Yes.” System responds:. System responds:

“OnStar ready,” then a tone. Say “Cancel route.” System responds: “Would you like to cancel route directions to your destination?” 2. Say “Yes.” System responds:

“OK, route canceled.” 3. Say “Goodbye.” Exits voice commands.

Route Preview

1. Push “OnStar ready,” then a tone.. System responds:

“OnStar ready,” then a tone.

2. Say “Route Preview.” System responds with the next three maneuvers.

3. Say “Goodbye.” Exits voice commands.

Repeat

1. Push “OnStar ready,” then a tone.. System responds:

“OnStar ready,” then a tone.

2. Say “Repeat.” System responds with the last direction given, then responds with “OnStar ready,” then a tone.

3. Say “Goodbye.” Exits voice commands.

Get My Destination

1. Push “OnStar ready,” then a tone.. System responds:

“OnStar ready,” then a tone.

2. Say “Get my destination.” System responds with miles to the destination, then responds with “OnStar ready,” then a tone.

3. Say “Goodbye.” Exits voice commands.

    See also:

    Dome Lamps
    The dome lamps are located in the overhead console and above the rear seat passengers. The dome lamps come on when a door is opened, unless the dome lamp override button is pressed in. The lamps can ...

    Fog Lamps
    To replace one of these bulbs: 1. Locate the fog lamp assembly under the front facia. 2. Disconnect the bulb socket from the electrical connector, turn, and pull out the bulb assembly. 3. Remov ...

    General Towing Information
    Only use towing equipment that has been designed for the vehicle. Contact your dealer or trailering dealer for assistance with preparing the vehicle for towing a trailer. See the following trailer t ...