Footnotes — Maintenance Schedule Additional Required Services — Normal

a) Check all fuel and vapor lines and hoses for proper hook-up, routing, and condition. Check that the purge valve, if the vehicle has one, works properly. Replace as needed.
b) Or every four years, whichever comes first.
c) Do not directly power wash the transfer case output seals. High pressure water can overcome the seals and contaminate the transfer case fluid. Contaminated fluid will decrease the life of the transfer case and should be replaced.
d) Or every five years, whichever comes first. See Cooling System on page 10‑19.
e) Or every 10 years, whichever comes first. Inspect for fraying, excessive cracking, or damage; replace, if needed.

Footnotes — Maintenance Schedule Additional Required Services — Severe

    See also:

    Engine Coolant Temperature Gauge
    Metric English This gauge shows the engine coolant temperature. Under normal driving conditions the gauge will read approximately 100°C (210°F) or less. If the gauge pointer is near 125°C (26 ...

    Starting the Vehicle
    1. Press and release on the Remote Keyless Entry transmitter. 2. Press and hold for about two seconds. The turn signal lamps will briefly flash to confirm the vehicle has been started. The pa ...

    Consistency of Readings
    Always check the fluid level at least twice using the procedure described previously. Consistency (repeatable readings) is important to maintaining proper fluid level. If readings are still inconsiste ...