Hood

To open the hood:

1. Pull the handle with this symbol on it. It is located inside the vehicle to the left of the brake pedal.

1. Pull the handle with this symbol on it. It is located inside the vehicle to the left of the brake pedal.

2. Go to the front of the vehicle and locate the secondary hood release. This is located under the hood, near the center of the grille.

2. Go to the front of the vehicle and locate the secondary hood release. This is located under the hood, near the center of the grille.

3. Push the secondary hood release to the right.

4. Lift the hood.

Before closing the hood, be sure all the filler caps are on properly.

Then bring the hood from full open to within 152mm (6 in) from the closed position, pause, and push the front center of the hood with a swift, firm motion to fully close the hood.

    See also:

    Storing Memory Positions
    To save into memory: 1. Adjust the driver seat, seatback recliner, and both outside mirrors. See Power Mirrors on page 2‑16 for more information. Not all vehicles will have the ability to sav ...

    Under the Hood
    GM's two-mode hybrid system enables "full" hybrid operation with the capability to cruise on electric power up to 30 mph. The gas engine kicks in if more acceleration is needed, as well ...

    Unable to Connect to OnStar Message
    If there is limited cellular coverage or the cellular network has reached maximum capacity, this message may come on. Push Q to try the call again or try again after driving a few miles into anoth ...