Storing Memory Positions

To save into memory:

1. Adjust the driver seat, seatback recliner, both outside mirrors, and the throttle and brake pedals, if equipped.

See Power Mirrors on page 2‑15 and Adjustable Throttle and Brake Pedal on page 9‑27 for more information.

Not all mirrors and adjustable throttle and brake pedals will have the ability to save and recall their positions.

2. Press and hold “1” until two beeps sound.

3. Repeat for a second driver position using “2.” To recall, press and release “1” or “2.” The vehicle must be in P (Park).

A single beep will sound. The seat, outside mirrors, and adjustable throttle and brake pedals will move to the position previously stored for the identified driver.

    See also:

    Recommended Fuel
    Use regular unleaded gasoline with a posted octane rating of 87 or higher. If the octane rating is less than 87, an audible knocking noise, commonly referred to as spark knock, might be heard when dri ...

    Storing the Tools
    A. Tool Bag B. Wing Bolt C. Jack Put back all tools as they were stored in the jack storage compartment and put the compartment cover back on. 1. Ensure that the bottom of the jack is facing tow ...

    Reading Lamps
    For vehicles with reading lamps, they are located on the overhead console. To turn on the reading lamps, press the button located next to each lamp. To turn them off, press the button again. The veh ...