Power Seats
To adjust a power seat, if equipped:
• Move the seat forward or rearward by sliding the control forward or rearward.
• If available, raise or lower the front or rear part of the seat cushion by moving the front or rear of the control up or down.
• If available, raise or lower the entire seat by moving the entire control up or down.
See also:
License Plate Lamp
To replace one of these bulbs:
1. Remove the two screws holding each of the license plate lamps to the liftgate trim.
2. Turn and pull the license plate lamp forward through the liftgate trim open ...
Global Off
Depending on the infotainment system, the RSE system may have a Global Off feature.
The Global Off feature disables all RSE system features. Press and hold the radio
power button for more than thr ...
Shifting into Neutral
To shift the transfer case to N (Neutral) do the following:
1. Make sure the vehicle is parked so that it will not roll.
2. Set the parking brake and apply the regular brake pedal. See Parking Brake ...