Navigation

OnStar navigation requires the Directions and Connections service plan.

Push Turn-by-Turn Navigation to receive directions or have them sent to the vehicle navigation screen. Destinations can also be forwarded to the vehicle from Google Maps™ or MapQuest.com. The OnStar mapping database is continuously updated. Visit www.onstar.com for coverage maps.

Turn-by-Turn Navigation

1. Push 2. Request directions. to connect to a live Advisor.

2. Request directions.

3. Directions are downloaded to the vehicle.

4. Follow the voice-guided commands.

Using Voice Commands During a Planned Route

Cancel Route

1. Push “OnStar ready,” then a tone.. System responds:

“OnStar ready,” then a tone.

Say “Cancel route.” System responds: “Would you like to cancel route directions to your destination?” 2. Say “Yes.” System responds:

“OK, route canceled.” 3. Say “Goodbye.” Exits voice commands.

Route Preview

1. Push “OnStar ready,” then a tone.. System responds:

“OnStar ready,” then a tone.

2. Say “Route Preview.” System responds with the next three maneuvers.

3. Say “Goodbye.” Exits voice commands.

Repeat

1. Push “OnStar ready,” then a tone.. System responds:

“OnStar ready,” then a tone.

2. Say “Repeat.” System responds with the last direction given, then responds with “OnStar ready,” then a tone.

3. Say “Goodbye.” Exits voice commands.

Get My Destination

1. Push “OnStar ready,” then a tone.. System responds:

“OnStar ready,” then a tone.

2. Say “Get my destination.” System responds with miles to the destination, then responds with “OnStar ready,” then a tone.

3. Say “Goodbye.” Exits voice commands.

Other Navigation Services Available from OnStar

OnStar eNav: Allows subscribers to send destinations from Google Maps™ and MapQuest.com to their Turn-by-Turn Navigation or screen-based navigation system.

When ready, the directions will be downloaded to the vehicle.

Destination Download: Push After the call ends, push the “Go” button on the navigation screen to begin driving directions., then request the Advisor to download directions to the navigation system in the vehicle.

After the call ends, push the “Go” button on the navigation screen to begin driving directions.

Destinations can also be downloaded on the go.

For information about eNav, Destination Download, and coverage maps visit www.onstar.com.

    See also:

    Exterior Lighting
    The exterior lamps control is located on the instrument panel to the left of the steering wheel. : Turns off the automatic headlamps and Daytime Running Lamps (DRL). Turn the headlamp control ...

    Remote Keyless Entry (RKE) System
    See Radio Frequency Statement on page 13‑22 for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-GEN/210/220/310. If there is ...

    Safety Belts
    This section of the manual describes how to use safety belts properly. It also describes some things not to do with safety belts. WARNING Do not let anyone ride where a safety belt cannot be worn pr ...