Electric Trailer Brake Control Wiring Provisions
These wiring provisions for an electric trailer brake controller are included with the vehicle as part of the trailer wiring package.
The instrument panel contains blunt cut wires behind the steering column for the electric trailer brake controller. The harness contains the following wires:
• Red/Black: Power Supply
• White: Brake Switch Signal
• Gray: Illumination
• Dark Blue: Trailer Brake Signal
• Black: Ground
The electric trailer brake controller should be installed by your dealer or a qualified service center.
See also:
Voice Pass-Thru
Voice pass-thru allows access to the voice recognition commands on the cell phone. See your cell phone manufacturer's user guide to see if the cell phone supports this feature.
To access contacts sto ...
Symbols
The navigation system may have a feature that lets the driver view symbols on the navigation screen while using the rear vision camera.
The Ultrasonic Rear Park Assist (URPA) system must not be disab ...
Instrument Panel Illumination Control
(Instrument Panel Brightness): This feature controls the brightness of the instrument panel lights and is located next to the exterior lamps control.
Push the knob to extend out and then it can be ...