Remote Keyless Entry (RKE) System
See Radio Frequency Statement on page 13‑21 for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-GEN/210/220/310.
If there is a decrease in the RKE operating range:
○ Check the distance. The transmitter may be too far from the vehicle.
○ Check the location. Other vehicles or objects may be blocking the signal.
○ Check the transmitter's battery. See “Battery Replacement” later in this section.
○ If the transmitter is still not working correctly, see your dealer or a qualified
technician for service.
See also:
Erasing Universal Remote Buttons
All programmed buttons should be erased when the vehicle is sold or the lease ends.
To erase all programmed buttons on the Universal Remote device:
1. Press and hold down the two outside buttons u ...
Belts
• Belts may need replacing if they squeak or show signs of cracking or splitting.
• Trained dealer technicians can inspect the belts and recommend replacement when necessary. ...
Compass Variance (Zone) Procedure
1. Do not set the compass zone when the vehicle is moving.
Only set it when the vehicle is in P (Park).
Press the vehicle information button until PRESS TO CHANGE COMPASS ZONE displays.
2. Find ...