Parking on Hills
WARNING
Parking the vehicle on a hill with the trailer attached can be dangerous. If something goes wrong, the rig could start to move.
People can be injured, and both the vehicle and the trailer can be damaged. When possible, always park the rig on a flat surface.
If parking the rig on a hill:
1. Press the brake pedal, but do not shift into P (Park) yet.
Turn the wheels into the curb if facing downhill or into traffic if facing uphill.
2. Have someone place chocks under the trailer wheels.
3. When the wheel chocks are in place, release the brake pedal until the chocks absorb the load.
4. Reapply the brake pedal.
Then apply the parking brake and shift into P (Park).
5. Release the brake pedal.
See also:
Compass Zone
The zone is set to zone eight upon leaving the factory. Your dealer will set the correct zone for your location.
Under certain circumstances, such as during a long distance cross-country trip or movi ...
Storing the Tire Sealant and Compressor Kit
The tire sealant and compressor kit is located in the storage compartment on the driver side, at the rear of the vehicle.
1. Press down on the latch tab and pull the cover off to access the storage ...
When the System Does Not Seem To Work Properly
If the LDW symbol does not appear:
○ The lane markings on the road may not be seen.
○ The camera sensor may be blocked by dirt, snow or ice.
○ The windshield may be damaged.
` ...