Air Vents

Use the slider switch in the center of the outlet, to change the direction of the airflow. Use the thumbwheel near the outlet to control the amount of airflow or to shut off the airflow.

Keep all outlets open whenever possible for best system performance.

Operation Tips

• Clear away any ice, snow, or leaves from the air inlets at the base of the windshield that can block the flow of air into the vehicle.

• Use of non-GM approved hood deflectors can adversely affect the performance of the system.

• Keep the path under all seats clear of objects to help circulate the air inside the vehicle more effectively.

• If fogging reoccurs while in vent or bi-level modes with mild temperature throughout the vehicle, turn on the air conditioner to reduce windshield fogging.

    See also:

    Ignition Positions
    The ignition switch has four different positions. In order to shift out of P (Park), the ignition must be in ON/RUN or ACC/ACCESSORY and the brake pedal must be applied. Notice: Using a tool to fo ...

    Range Selection Mode
    Range Selection Mode The Range Selection Mode switch, if equipped, is located on the shift lever. To enable the Range Selection feature: 1. Move the column shift lever to the M(Manual) position ...

    Steering Wheel Adjustment
    To adjust the steering wheel: 1. Pull the lever (A) down. 2. Move the steering wheel up or down. 3. Pull or push the steering wheel closer or away from you. 4. Push the lever (A) up to lock the ...