Removing the Third Row Seats
To remove a third row seat:
1. Remove the cargo management system, if available and installed. See Cargo Management System on page 4‑4.
2. Remove anything on or under the seat.
Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety belts and return them to their normal stowed position before folding a rear seat.
3. Fold the seatback down.
See “Folding the Seatback” earlier in this section.
4. Remove the rear bolts on the floor on each side of the seat.
5. Remove the seat by tilting it slightly upward, and then pulling it out of the rear of the vehicle in one motion.
6. Replace the bolts in the floor holes for storage.
See also:
Turning the System On and Off
The URPA system can be turned on and off using the infotainment system controls.
See Vehicle Personalization on page 5‑33 for more information.
When the system is off, PARK ASSIST OFF display ...
Interior
The Sierra showcases two different interior designs. Work Truck and SLE
models are more utility-minded, with large controls and door handles that can be
operated while wearing gloves. The SLT offe ...
Driving in Mud, Sand, Snow, or Ice
Use a low gear when driving in mud – the deeper the mud, the lower the gear.
Keep the vehicle moving to avoid getting stuck.
Traction changes when driving on sand. On loose sand, such as on beach ...