Shutting the Engine Off After a Remote Start

To manually shut off a remote start:

• Aim the RKE transmitter at the vehicle and press • Turn on the hazard warning flashers. until the parking lamps turn off.

• Turn on the hazard warning flashers.

• Turn the ignition switch on and then off.

    See also:

    USB Support
    The USB connector is located on the instrument panel or in the center console, and uses the USB 2.0 standard. ...

    DIC Operation and Displays
    Use the DIC buttons located in the center of the instrument panel to access different displays. The DIC displays trip, fuel, vehicle system information, and warning messages. It also shows the shi ...

    Overheated Engine Protection Operating Mode
    This emergency operating mode lets the vehicle be driven to a safe place in an emergency situation. If an overheated engine condition exists, an overheat protection mode which alternates firing groups ...