Setting the Clock

To set the time and date for the radio with CD, DVD, and USB Port:

1. Turn the ignition key to ACC/ACCESSORY or ON/RUN, then press 2. Press to display HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year). to turn the radio on.

2. Press 3. Press the pushbutton located under any one of the labels to be changed. to display HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year).

3. Press the pushbutton located under any one of the labels to be changed.

4. To increase or decrease the time or date, turn For detailed instructions on setting the clock for the vehicle's specific audio system, see Clock on page 5‑8. clockwise or counterclockwise.

For detailed instructions on setting the clock for the vehicle's specific audio system, see Clock on page 5‑8.

    See also:

    Lamp Messages
    TURN SIGNAL ON This message displays and a chime sounds if a turn signal is left on for 1.2 km (0.75 mile). Move the turn signal/multifunction lever to the off position. ...

    Engine Power Messages
    ENGINE POWER IS REDUCED This message displays and a chime sounds when the cooling system temperature gets too hot and the engine further enters the engine coolant protection mode. See Engine Overhea ...

    Checking Coolant
    The vehicle must be on a level surface when checking the coolant level. Check to see if coolant is visible in the coolant surge tank. If the coolant inside the coolant surge tank is boiling, do not ...