Checking Coolant
The vehicle must be on a level surface when checking the coolant level.
Check to see if coolant is visible in the coolant surge tank. If the coolant inside the coolant surge tank is boiling, do not do anything else until it cools down. If coolant is visible but the coolant level is not at or above the COLD FILL line, add a 50/50 mixture of clean, drinkable water and DEX-COOL coolant at the coolant surge tank, but be sure the cooling system is cool before this is done. See Cooling System on page 10‑15 for more information.
The coolant surge tank is located in the engine compartment on the driver side of the vehicle. See Engine Compartment Overview on page 10‑6 for more information on location.
See also:
What to Use
Read the manufacturer's instructions before refilling the windshield washer fluid.
If operating the vehicle in an area where the temperature may fall below freezing,
use a fluid that has suffi ...
Dolly Towing
Front Towing (Front Wheels Off the Ground) – Two-Wheel-Drive Vehicles
Notice: If a two-wheel drive vehicle is towed with the rear wheels on the ground, the transmission could be damaged.
The rep ...
What Makes an Airbag Inflate?
In a deployment event, the sensing system sends an electrical signal triggering
a release of gas from the inflator. Gas from the inflator fills the airbag causing
the bag to break out of the cover ...





