See also:

Stop/Tail/Turn Signal/ Sidemarker Lamp
To replace one of these lamps: 1. Open the liftgate. See Liftgate on page 2‑9. 2. Remove the two screw covers from the taillamp assembly. 3. Remove the two screws securing the taillamp asse ...

Manual Operation of Power Liftgate
To change the liftgate to manual operation, press OFF on the power liftgate switch. A message displays on the DIC indicating manual operation mode. See Driver Information Center (DIC) (Without DIC B ...

Blank Display
This display shows no information. ...