Clock
To set the time:
1. Press the CONFIG button to enter the menu options. Turn the TUNE/MENU knob to scroll through the available setup features. Press the TUNE/MENU knob or press the Time screen button to display other options within that feature.
2. Press + or − to decrease or increase the Hours and Minutes displayed on the clock.
12/24 HR Format: Press the 12 HR screen button for standard time; press the 24 HR screen button for military time.
Day + or Day −: Press the Day + or Day − display buttons to increase or decrease the day.
Display: Press Display to turn the display of the time on the screen on or off.
See also:
Lower Anchor and Top Tether Anchor Locations
Rear Seat
(Top Tether Anchor): Seating positions
with top tether anchors.
(Lower Anchor): Seating positions
with two lower anchors.
The rear outboard seating positions have exposed metal anch ...
Engine Hours
To display the ENGINE HOURS, place the ignition in LOCK/OFF or ACC/ACCESSORY, then press and hold the trip odometer reset stem for four seconds while viewing the ODOMETER. This display shows the total ...
Lane Departure Warning (LDW)
For vehicles with LDW, it is intended to help avoid unintentional lane departures.
It may provide a warning if the vehicle is crossing a lane without using a turn
signal. LDW uses a camera sensor ...