Technical Data

See also:

Shifting Out of Neutral
To shift the transfer case out of N (Neutral) do the following: 1. Set the parking brake and apply the regular brake pedal. 2. Turn the ignition to ON/RUN with the engine off, and shift the transmis ...

Using the “Digit Store” Command
If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number. To hear all of the numbers recognized by the system, say “Verify” at any time. 1. Press a ...

Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps
To replace one of these bulbs: 1. Open the tailgate. See Tailgate on page 2‑10 for more information. 2. Remove the two rear lamp assembly screws near the tailgate latch strikerpost and pull ...