See also:

Compass Calibration Procedure
1. Before calibrating the compass, make sure the compass zone is set to the variance zone in which the vehicle is located. See “Compass Variance (Zone) Procedure” earlier in this section. Do not ...

Checking Engine Oil
It is a good idea to check the engine oil level at each fuel fill. In order to get an accurate reading, the vehicle must be on level ground. The engine oil dipstick handle is a yellow loop. See Engi ...

Throttle and Brake Pedal Adjustment
On vehicles with this feature, you can change the position of the throttle and brake pedals. The control used to adjust the pedals is located on the instrument panel below the climate control sys ...