Ignition Transmission Lock Check
While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position.
• The ignition should turn to LOCK/OFF only when the shift lever is in P (Park).
• The ignition key should come out only in LOCK/OFF.
Contact your dealer if service is required.
See also:
Sheet Metal Damage
If the vehicle is damaged and requires sheet metal repair or replacement, make sure the body repair shop applies anti-corrosion material to parts repaired or replaced to restore corrosion protection.
...
Shifting Out of Four-Wheel Drive Low
To shift from Four-Wheel Drive Low to Four-Wheel Drive High, AUTO or Two-Wheel Drive High, the vehicle must be stopped or moving less than 5 km/h (3 mph) with the transmission in N (Neutral) and the i ...
How to Check Lubricant
2500HD with 6.0 L
All Other Series and Engines
To get an accurate reading, the vehicle should be on a level surface.
• For all 4.3 L, 4.8 L and 5.3 L 1500 Series applications, the proper leve ...