Using ABS
Do not pump the brakes. Just hold the brake pedal down firmly and let ABS work. You might hear the ABS pump or motor operating and feel the brake pedal pulsate, but this is normal.
See also:
Voltmeter Gauge
When the engine is not running, but the ignition is turned on, this gauge shows the battery's state of charge in DC volts.
When the engine is running, this gauge shows the condition of the charging ...
Brake Fluid
The brake master cylinder reservoir is filled with DOT 3 brake fluid. See Engine Compartment Overview on page 10‑6 for the location of the reservoir.
There are only two reasons why the brake ...
AM-FM Radio and AM-FM Radio with CD Player
To set the clock:
1. Turn the ignition key to ACC/ ACCESSORY or ON/RUN, then press the button to turn the radio on.
2. Press the button until the hour numbers begin to flash, then turn the knob t ...