Blank Display

This display shows no information.

    See also:

    Starting Procedure
    1. With your foot off the accelerator pedal, turn the ignition key to START. When the engine starts, let go of the key. The idle speed will go down as your engine gets warm. Do not race the engine imm ...

    Windshield Wipers
    If the wiper motor overheats due to heavy snow or ice, the windshield wipers will stop until the motor cools and will then restart. Although the circuit is protected from electrical overload, overloa ...

    Bulb Replacement
    For the proper type of replacement bulbs, see Replacement Bulbs on page 10‑29. For any bulb-changing procedure not listed in this section, contact your dealer. ...