Towing with a Stability Control System
When towing, the sound of the stability control system might be heard. The system is reacting to the vehicle movement caused by the trailer, which mainly occurs during cornering. This is normal when towing heavier trailers.
See also:
Safety System Check
Now and then, check that the safety belt reminder light, safety belts, buckles, latch plates, retractors, and anchorages are all working properly.
Look for any other loose or damaged safety belt syst ...
Passing Another Vehicle While Using Cruise Control
Use the accelerator pedal to increase the vehicle speed. When you take your foot off the pedal, the vehicle will slow down to the previous set cruise speed. ...
Range Selection Mode
Range Selection Mode
The Range Selection Mode switch, if equipped, is located on the shift lever.
To enable the Range Selection feature:
1. Move the column shift lever to the M(Manual) position ...