Storing and Deleting Phone Numbers
The system can store up to 30 phone numbers as name tags in the Hands-Free Directory that is shared between the Bluetooth and OnStar systems, if equipped.
The following commands are used to delete and store phone numbers.
Store: This command will store a phone number, or a group of numbers as a name tag.
Digit Store: This command allows a phone number to be stored as a name tag by entering the digits one at a time.
Delete: This command is used to delete individual name tags.
Delete All Name Tags: This command deletes all stored name tags in the Hands-Free Calling Directory and the OnStar Turn-by-Turn Destinations Directory, if equipped.
See also:
Reading Lamps
For vehicles with reading lamps in the overhead console, press the button located next to the lamp to turn it on or off.
The vehicle may also have reading lamps in other locations. To turn the lamps ...
What to Add
Use only new DOT 3 brake fluid from a sealed container. See Recommended Fluids
and Lubricants on page 11‑12.
Always clean the brake fluid reservoir cap and the area around the cap before
re ...
Fuel Economy Light
For vehicles with the fuel economy mode light, it comes on when the eco (economy)
switch, located on the center console near the shifter, is pressed. For vehicles
with a Driver Information Cente ...