Easy Exit Driver Seat
This feature can move the seat rearward to allow extra room to exit the vehicle.
(Easy Exit Driver Seat): Press to recall the easy exit seat position.
The vehicle must be in P (Park).
If the easy exit seat feature is programmed on in the vehicle personalization menu, automatic seat movement occurs when the ignition key is removed.
A single beep sounds. The driver seat moves back approximately 8 cm (3 in). To move the seat back farther, press again until the
seat is all the way back.
If something has blocked the driver seat while recalling the exit position, the recall may stop. Remove the obstruction; then press and hold the power seat control rearward for two seconds. Try recalling the exit position again. If the exit position is still not recalling, see your dealer for service.
See Vehicle Personalization (With DIC Buttons) on page 5‑46 for more information.
See also:
Storing the Tire Sealant and Compressor Kit
The tire sealant and compressor kit is located in the storage compartment on the driver side, at the rear of the vehicle.
1. Press down on the latch tab and pull the cover off to access the storage ...
Service Parts Identification Label
This label, on the inside of the glove box, has the following information:
○ Vehicle Identification Number (VIN).
○ Model designation.
○ Paint information.
○ Production opt ...
Adding Equipment to the Airbag-Equipped Vehicle
Adding accessories that change the vehicle's frame, bumper system, height, front end, or side sheet metal may keep the airbag system from working properly.
The operation of the airbag system can also ...