Programming the Power Windows

If the battery on the vehicle has been recharged, disconnected, or replaced, windows with the express-up feature need to be reprogrammed for this feature to work. To program the window:

1. Close all doors with the ignition in the ACC/ACCESSORY, ON/RUN position, or when Retained Accessory Power (RAP) is active.

See Retained Accessory Power (RAP) on page 9‑20.

2. Press and continue to hold the window switch until the window is fully open.

3. Pull up and hold the window switch to close the window.

Continue to hold it briefly after the window is fully closed.

4. Repeat for each window that has the express-up feature.

    See also:

    Automatic Transmission Shift Lock Control Function Check
    WARNING When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room aroun ...

    TPMS Malfunction Light and Message
    The TPMS will not function properly if one or more of the TPMS sensors are missing or inoperable. When the system detects a malfunction, the low tire pressure warning light flashes for about one minut ...

    With Passenger Sensing System
    This vehicle has airbags. A rear seat is a safer place to secure a forward-facing child restraint. See Where to Put the Restraint on page 3‑49. In addition, the vehicle may have a passenger sen ...